Working with the Flight Route (the Flight Details Screen)

To view info about a particular flight, place the cursor in any column of the flight in the PTD Supervisor screen and click on Route/F5. The Flight Details screen will open.

The description of the Flight Details screen:

Each row on the screen corresponds to a route point. I.e., the route between two cities will be described by two rows, if the route has one intermediate station, there will be three rows, etc.

Carrier – airline designator
Flight - flight number
Type – aircraft type
Board – aircraft board number
T – flight type
Suff. – operational suffix
Pr A – arriving aircraft parking place number
Pr D – departing aircraft parking place number
Arriv – scheduled time of arrival in the route station (according to the schedule, not subject to change); the format of time display used by the system is described in the General Provisions.
Est. – estimated time of arrival
Act. – actual time of arrival
Dest. – code of route station
Depar – scheduled time of departure from the route station (according to the schedule, not subject to change); the format of time display used by the system is described in the General Provisions.
Est. – scheduled time of departure
Act. – actual time of departure
Code – delay code (may be several)
Time – delay time (may be several)

Also the background color is of importance.

Meaning of colors:

Gray – inactive (nothing is going on with respect to this object)
Green – active (some action is being performed, e.g., check-in, boarding, etc.)
Blue – inactive (the action is completed)
Yellow – flight delayed
Red – flight canceled

Gray, green and blue colors sequentially replace each other.

The screen buttons functions:

Undo /Shift+Esc - undo the last operation
Exit / Alt+X - exit from the screen
Landing/F4 – input the fact of landing
Take-off/F5 – input the fact of take-off
Add Segment/F7 – add a station on the route
Delete Segment/F3 – add a station from the route
Add Delay/Ins – input the delay
Delete Delay/Del – delete the delay
Cancel Segment/F8 – cancel flight to the route station
Save /F9 - save entered data

Replacement of Aircraft

To replace aircraft:

1. Place the cursor in the Aircraft area of the selected flight;

2. Press Spacebar to start editing mode;

3. Input aircraft designator (type or select from the Aircraft Designator Index which can be opened by pressing F1, it is described in more detail in the System Administrator Instruction);

4. Press F9 to save changes.

Board Number Input

To enter/change the board number:

5. Place the cursor in the Board area of the flight;

6. Press Spacebar to start editing mode;

7. Type board number;

8. Press F9 to save changes.

Other sections:

Working with the Flight Route (the Flight Details Screen)

Contents

Replacement of Aircraft

Board Number Input

See also:

Other sections:

Navigation menu

Search