Weight and Balance Module

The Weight and Balance Module is intended for working with aircraft cabin layouts: Creation of new cabin layouts, correcting and deletion of layouts created before, assignment of the cabin layout for the flight and its correction.

To start working with the Module, click on the Weight and Balance button in the Main Module. The Weight and Balance main screen will open (Figure 1).

Select the flight (as described in the General Provisions). The list contains all flights with status not lower than Check-in Preparation. After the flight is selected, the screen will change (see example in Figure 2).

Description of screen elements

Flight general data
Flight - flight number
Aircraft – aircraft type
Board – board number
Park – aircraft parking place number
Layout – seating layout (according to the layout name entered for this flight in the Weight and Balance Module)
Route – route (codes of cities/airports) after the base airport
Departure – time of departure
Board. time– boarding deadline
Type – flight type
Status – flight status
Check-in results — This area contains information about the passengers checked in for the flight. Here the quantitative data are displayed. They can be changed and supplemented at the check-in process. This area is described more detailed in the General Provisions.

Description of buttons

Exit / Alt+X - exit from the screen
Basic Layouts/F3 – open the Base Layouts screen
Flight Layout/F7 – open the Flight Layout screen

Other sections:

Weight and Balance Module

See also:

Other sections:

Navigation menu

Search