Alarms and Definitions in DCS Amber

From Wiki Amber.aero
Jump to navigation Jump to search
Alarm Definition
! Cabin not assigned Aircraft configuration is not assigned on the flight.
! Incoming telegrams There is erroneous/incorrect incoming telegram for the flight (Module “Telegrams”)
! Outgoing telegrams Alarm appears while outgoing telegrams are generated and means one of the telegram contains incomplete data format. (Module “Telegrams”)
!Configuration differ Transit flight, flight route segments bear different aircraft configuration.
! Special handling Aboard the flight are passengers requiring special attention!!! (Remarks displaying this alarm can be selected in Module “Administration” Table “Remarks Configuration”
! Overload For the flight is set maximum commercial capacity, alarm means the number of checked passengers and amount of checked baggage exceed the set maximum commercial capacity.
! No interaction with ETS Irregularity/Interruption occurred, flight mode set on ETL mode, interactive confirmation of ET is missing.
! APIS entered manually For the flight feature of APIS data control is set on. Alarm means passenger APIS data entered manually, scan not used.
! APIS data differ with booking information Data on passenger document or visa have been changed at checkin counter.
!Boarding There are passengers not yet passed boarding
! Crew number required For the flight is set on feature enabling generation and sending of outgoing messages. This feature requires mandatory input number of crew members.
! Crew check-in Feature requiring mandatory input crew data is configured.
! Not associated transfer baggage Transfer inbound baggage exists, alarm means not all inbound transfer baggage managed to be associated to transit passengers.

See also:

Other sections: