Error Messages Processing

From Wiki Amber.aero
Revision as of 14:56, 19 August 2021 by Editor1 (talk | contribs)
Jump to navigation Jump to search

Notification on Error Messages

If an incoming message contains an error and cannot be processed, then a !Inbound message

Messages Module-15.png
notification will be displayed in the flight data.

Messages, which contain errors, are shown in the flight data in the Telegrams →Inbound telegrams section.

Messages Module-16.png

Editing Error Messages

To edit a message:

  1. Open the Telegrams module.
  2. Select a flight.
  3. Open the Inbound telexes section
  4. Select a message with an error and edit its content.
Messages Module-17.png

To save the message and re-process it again, press Upload changes/F9.

Note.png A message can contain several errors, but the first error in it will be highlighted. If the first error is fixed, and the telegram is re-processed, it will be marked again, and the next error will be highlighted.

After re-processing a message, which contains no errors, the highlight is deleted, the line becomes white again. It means that the message can’t edited anymore, it is successfully processed, a copy of a message with fixed errors is uploaded.

Messages Module-18.png

The original telegram is stored in the list of telegrams for further analysis.

Filter for Working with Unattached Messages

The filter for the incoming messages in the Telegrams module allows to manage the unattached and not parsing messages.

To use the filter:

  1. Enter the Telegram module.
  2. Select Unattached option (F2).
  3. Press Inbound/F4. Filter window will be presented.
Messages Module-19.png


See also:

Other sections:

Retrieved from "http://wiki.amber.aero/index.php?title=Error_Messages_Processing&oldid=3780"